Pushing hard to get it over the line

While summer appears to be winding down as do the number of days that I’m willing to drive the car. It’s a double edged sword because the garage is still hot as hell but a fan helps.

So what has been going on? A lot of wiring,a lot of waiting for parts and time bending body panels. I decided to remake the firewall as the old one had a large hole from the factory miata fuse box. The new one is plain with minimal holes and several bc opponents mounted from the back side.

The wiring harnesses are all net new (minus the engine harness) and we’re made using txl wire and concentric twisting. My initial expectation was that it was hype but the results were true my magic! It is far more flexible than I ever expected. For connectors I went with deutch connectors besides for the fuel pump and fan (their connectors for 10GA was $$$)

The PDM install was next and I was able to get it mounted with space for the Hondata ecu. Wiring is a bit hectic but it should be fine and contained under the scuttle. One project that remains is an aluminum plate for the front of the dashboard to mount the wide and sensor and gauge cluster. With 2 rails for wiring management I am hopeful it will be easy to remove and install the scuttle without much fuss. As seems to be typical I have a whole host of ring terminals but none that are the right wire size or loop size..